Hyundai Elantra (CN7): Evaporative Emission Control System / Fuel Filler Cap

Description and operation

Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.

    Repair procedures Removal1.Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2.Disconnect the vent hose (A).3.Remove the fuel tank air filter (A) by rotating it 30 degrees.

    Repair procedures Removal1.Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2.Disconnect the vent hose (A).3.Remove the fuel tank air filter (A) by rotating it 30 degrees.

    Other information:

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Repair procedures

    Refrigerant System Service Basics (R-134a)Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning system.    • Air conditioning refrigerant or lubricant vapor can irritate your eyes, nose, or

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Photo Sensor

    Description and operation Description 1.The photo sensor is located at the center of the defrost nozzles.2.The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received which is transferred to

    Categories

     
    Copyright © 2025 www.helantra7.com - 0.0121