| Basic Service Symbols |
|
Symbol
|
Meaning
|
| Do not reuse the part. Replace a new one. |
| Apply engine oil or transmission oil to the part. |
| Apply automatic transmission fluid (ATF) to the part. |
| Apply grease to the part. |
| Apply sealant to the part. |
Components and components location Components Location[General type]1. Condenser[N Line]1. Condenser Repair procedures Inspection1.Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air.
Description• PDW consists of 8 sensors (front : 4 units, rear : 4 units) that are used to detect obstacles and transmit the result in three separate warning levels, the first, second and third to IBU via LIN communication.• IBU decides the alarm level by the transmitted communication message from the slav