Hyundai Elantra (CN7): Smart Key / Locking your vehicle (Touch sensor type)

1. Close all doors, engine hood and trunk.

2. Carry the smart key.

3. Either touch the touch sensor on the door handle (the engraved part) or press the Door Lock button (1) on the smart key.

4. The hazard warning lights will blink.

5. Make sure the doors are locked by pulling the door outside handle.

Information

• The door handle button will only operate when the smart key is within 28~40 inches (0.7~1 m) from the outside door handle.
• If you locked the door with the touch sensor on the door handle, the doors cannot be unlocked with the sensor within 3 seconds.

Information

Even though you press the outside door handle button or touch the touch sensor, the doors will not be locked and the chime will sound for 3 seconds if any of the following occurs:

• The Smart Key is in the vehicle
• The Engine Start/Stop button is in ACC or ON position.
• Any door except the trunk is opened.

CAUTION

When you leave your vehicle with the smart key, make sure to press the button on the front door handle or touch the touch sensor on the front door handle to lock the doors after closing all of the doors, the hood and the trunk. If you do not press the button or touch the touch sensor firmly, the doors might not be locked so please use caution.

WARNING

Do not leave the Smart Key in your vehicle with unsupervised children. Unattended children could press the Engine Start/ Stop button and may operate power windows or other controls, or even make the vehicle move, which could result in serious injury or death.