Hyundai Elantra (CN7): Body Side Molding / Rear Spoiler

Hyundai Elantra (CN7) 2021-2025 Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Spoiler

Components and components location

Component Location

1. Rear spoiler

Repair procedures

Replacement

•	When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

•	Put on gloves to prevent hand injuries.

1.	Remove the trunk lid back panel. (Refer to Trunk Lid - "Trunk Lid Back Panel")

2.	Loosen the mounting screws, remove the trunk lid back panel bracket (A).

3.	Loosen the mounting screws, remove the rear spoiler (A).

4.	To install, reverse the removal procedure.

❮Rear Mud Guard

Repair procedures Replacement • When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

Sunroof❯

Other information:

Hyundai Elantra (CN7) 2021-2025 Service Manual: In-car Sensor

Description and operation DescriptionThe In-car air temperature sensor is built in the heater & A/C control unit.The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accor

Hyundai Elantra (CN7) 2021-2025 Service Manual: Heater & A/C Control Unit (Manual)