
Door handle lamp
When all the doors (and trunk) are closed and locked, the door handle lamp will come on for about 15 seconds if any of the below is performed.
Headlamp and parking lamp
When the headlamp (lamp switch in the headlamp or AUTO position) is on and all doors (and trunk) are locked and closed, the headlamp and parking lamp will come on for 15 seconds if/or any of the below is performed.
At this time, if you press the door lock or unlock button, the headlamp and parking lamp will turn off immediately.
You can activate or deactivate the Welcome Light from the User Settings Mode on the LCD display.
Interior lamp
When the interior lamp switch is in the DOOR position and all doors (and trunk) are closed and locked, the room lamp will come on for 30 seconds if any of the below is performed.
At this time, if you press the door lock or unlock button, the room lamp will turn off immediately.
Push the switch to turn the light on or off. • : The lamp will turn on if this button is pressed. • : The lamp will turn off if this button is pressed.
A. Wiper speed control MIST – Single wipe OFF – Off INT / --- – Intermittent wipe LO– Low wiper speed HI – High wiper speed B. Intermittent control wipe time adjustment C.
Schematic diagrams Circuit Diagram Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the cover (A) & (B).3.Disconnect the front view camera unit connector (A).4.Separate the fixed points (A) of coupler.5.
Components and components location Components and Components Location Repair procedures Removal • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.• Take care not to bend or scratch the trim and panels.