Hyundai Elantra: Engine Coolant / Changing Engine Coolant
			
			
			Have coolant changed by an authorized 
HYUNDAI dealer according to the 
Maintenance Schedule at the beginning 
of this chapter.
WARNING
Do not use engine coolant or antifreeze 
in the washer fluid reservoir.
Engine coolant can severely obscure 
visibility when sprayed on the 
windshield and may cause loss of 
vehicle control resulting in an accident.
Engine coolant may also cause damage 
to paint and body trim.
NOTICE
To prevent damage to engine parts, put 
a thick towel around the radiator cap 
before refilling the coolant to prevent 
the coolant from overflowing into 
engine parts, such as the alternator.
   
Check the condition and connections 
of all cooling system hoses and 
heater hoses. Replace any swollen or 
deteriorated hoses.
The coolant level should be filled 
between the F and the L marks on the 
side of the coolant reservoir when the 
engine is cool...
   
 
   Checking the brake fluid level
Check the fluid level in the reservoir 
periodically. The fluid level should be 
between MAX and MIN marks on the side 
of the reservoir...
   
 
   Other information:
   Components1. Water pipe2. Water hose3. Integrated thermal management module (ITM)4. Heater pipe5. Turbo charger coolant hose6. Heater hose7. Heater pipe A8. Heater pipe A gasket9. Oil cooler hose A10. Oil cooler pipe11. Oil cooler hose B12. Water inlet fitting13...
   
   Components and components location
   Component Location 1. Luggage side trim 						
Repair procedures
   Replacement
								   •
                    When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...