Hyundai Elantra (CN7): Instrument Cluster

Hyundai Elantra (CN7) 2021-2026 Owner's Manual / Instrument Cluster

„„Conventional cluster (Type A)

Full LCD cluster (Type B)

1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. Warning and indicator lights
6. LCD display (including trip computer)

The actual cluster in the vehicle may differ from the illustration. For more information, refer to the "Gauges and Meters" in this chapter.

Air bag warning labels, required by the U.S. National Highway Traffic Safety Administration (NHTSA), are attached to alert the driver and passengers of potential risks of the air bag system.

Adjusting instrument cluster illumination When the vehicle's parking lamps or headlamps are on, press the illumination control button to adjust the brightness of the instrument panel illumination.

Other information:

Hyundai Elantra (CN7) 2021-2026 Service Manual: Rear Combination Lamp

Repair procedures RemovalOutside Combination Lamp1.Disconnect the negative (-) battery terminal.2.Remove the combination lamp cover (A).3.Disconnect the rear combination lamp connector (A).4.Loosen the mounting nuts and remove the rear conbination lamp (A).

Hyundai Elantra (CN7) 2021-2026 Service Manual: Mode Control Actuator

Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.

Categories

 
Copyright © 2026 www.helantra7.com - 0.0159