Hyundai Elantra (CN7): Warning and Indicator Lights / Electronic Stability Control (ESC) Indicator Light
This indicator light illuminates:
• When you place the ignition switch to the ON position.
-- The Electronic Stability Control indicator light illuminates for about 3 seconds and then goes off.
• Whenever there is a malfunction with the ESC system.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks:
While the ESC is operating.
This warning light illuminates: • When you place the ignition in the ON position. -- It illuminates for approximately 3 seconds and then goes off.
This indicator light illuminates: • When you place the ignition switch to the ON position. -- It illuminates for approximately 3 seconds and then goes off.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Heater & A/C Control Unit (DATC)
Components and components location Components[This illustration shows the LHD type. RHD type is symmetrical.][Connector A] Pin No Function Pin No Function 1Battery9IGN22ILL+ (TAIL)10ISG Battery (+)3-11IGN14LIN BUS12HTD5-13-6-14-7-15-8RHEO (
Hyundai Elantra (CN7) 2021-2026 Service Manual: Repair procedures
Variant Coding When you need variant coding:– Replace Front View Camera with a new one※ EOL Variant Coding and calibration required for new replacementFront View Camera Variant CodingFront view camera variant coding makes it possible to operate functions for each vehicle type.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Rear Seats
- General Tightening Torque Table. General information
- Instrument Cluster
- New on site
- Most important about car
