Hyundai Elantra (CN7): Instrument Cluster / Warning and Indicator Lights
Information
Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention.
- Air Bag Warning Light & Seat Belt Warning Light
- Anti-lock Brake System (ABS) Warning Light
- Electronic Brake Force Distribution (EBD) System Warning Light
- Electronic Parking Brake (EPB) Warning Light
- AUTO HOLD Indicator Light
- Electric Power Steering (EPS) Warning Light
- Malfunction Indicator Lamp (MIL)
- Charging System Warning Light
- Engine Oil Pressure Warning Light
- Low Fuel Level Warning Light
- Master Warning Light
- Low Tire Pressure Warning Light
- Electronic Stability Control (ESC) Indicator Light
- Electronic Stability Control (ESC) OFF Indicator Light
- Immobilizer Indicator Light (with smart key)
- Turn Signal Indicator Light
- Exterior Light Warning Light
- LED headlight warning light
- High Beam Indicator Light
- Light ON Indicator Light
- High Beam Assist indicator light
- Forward Collision-Avoidance Assist Warning Light
- Lane Keep Assist Indicator Light
Intelligent variable transmission shift indicator This indicator displays which shift button position is selected.
Air Bag Warning Light This warning light illuminates: • When you place the ignition switch to the ON position. -- The air bag warning light illuminates for about 6 seconds and then turns off when all checks have been performed • The air bag warning light will remain illuminated if there is a malfunction with the Safety Restraint System (SRS) air bag operation.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Compressor oil
Repair procedures Oil Specification1.The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed.2.Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the model of compressor.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mode Control Actuator
Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Brake System
- Components and components location
- Engine Control / Fuel System
- New on site
- Most important about car
