
This indicator light illuminates:
• When you place the ignition switch to the ON position.
-- It illuminates for approximately 3 seconds and then goes off.
• When you deactivate the ESC system by pressing the ESC OFF button.
Immobilizer Indicator Light
This indicator light illuminates:
• When the vehicle detects the immobilizer in the key with the ignition switch in the ON position.
-- At this time, you can start the engine.
-- The indicator light goes off after
starting the engine.
This indicator light blinks:
• When there is a malfunction with the immobilizer system.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
This indicator light illuminates: • When you place the ignition switch to the ON position. -- The Electronic Stability Control indicator light illuminates for about 3 seconds and then goes off.
This indicator light illuminates for up to 30 seconds: When the vehicle detects the smart key in the vehicle with the Engine Start/Stop button in the ACC or ON position.
Repair procedures Replacement1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad")3.Remove the steering column upper & Lower shroud.4.Remove the ignition switch and disconnecting the Key Warning / immobilizer connector.
Components and components location Components Location1. Front rader unit Specifications Specification Item Specification Power supply (V)12Operation voltage (V)9 - 16 Schematic diagrams Circuit DiagramTerminal function Pin No Te