Hyundai Elantra (CN7): Engine Control / Fuel System
- Troubleshooting
- Specifications
- Special service tools
- Engine Control System
- Description and operation
- Components and components location
- Engine Control Module (ECM)
- Boost Pressure Sensor (BPS)
- ETC (Electronic Throttle control) System
- Manifold Absolute Pressure Sensor (MAPS)
- Intake Air Temperature Sensor (IATS)
- Engine Coolant Temperature Sensor (ECTS)
- Crankshaft Position Sensor (CKPS)
- Camshaft Position Sensor (CMPS)
- Knock Sensor (KS)
- Heated Oxygen Sensor (HO2S)
- Accelerator Position Sensor (APS)
- CVVT Oil Temperature Sensor (OTS)
- Oil Pressure Sensor (OPS)
- Rail Pressure Sensor (RPS)
- Injector
- Ambient Temperature Sensor (ATS)
- Purge Control Solenoid Valve (PCSV)
- CVVT Oil Control Valve (OCV)
- Variable Force Solenoid (VFS)
- Fuel Pressure Control Valve (FPCV)
- Electric WGT Control Actuator
- RCV Control Solenoid Valve
- Integrated Thermal Management Module (ITM)
- CVVD Actuator
- Fuel Delivery System
Description and operation DescriptionContinuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load.
Basic TroubleshootingBasic Troubleshooting GuideCustomer Problem Analysis SheetBasic Inspection ProcedureMeasuring Condition of Electronic Parts' ResistanceThe measured resistance at high temperature after vehicle running may be high or low.
Other information:
Hyundai Elantra (CN7) 2021-2025 Service Manual: Photo Sensor
Description and operation Description 1.The photo sensor is located at the center of the defrost nozzles.2.The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received which is transferred to
Hyundai Elantra (CN7) 2021-2025 Service Manual: Evaporator Core
Repair procedures Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the heater core cover (A) after loosening the mounting screws.4.Pull out the evaporator core (A) from the heater unit.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Towing
- Jump Starting
- Driving your vehicle
- New on site
- Most important about car
