Components and components location Components1. Front seat belt retractor2. Height adjust 3. Front seat belt upper anchor4. Rear seat belt retractor [RH]5.
General Troubleshooting InformationBefore Troubleshooting1.Check applicable fuses in the appropriate fuse/relay box.2.Check the battery for damage, state of charge, and clean and tight connections.
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear package tray trim.(Refer to Body - "Rear Package Tray Trim")3.Loosen the mounting screws and remove the high mounted stop lamp (A).Installation1.Install the high mounted stop lamp.
Description DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuat