| Component Location |

| 1. Power door mirror 2. Power door mirror switch | 3. Power folding mirror switch |
Components and components location Components Schematic diagrams Circuit DiagramWithout Mirror FoldingWith Mirror Folding Repair procedures Inspection[Power Window Switch]1.
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the front bumper.(Refer to Body - "Front Bumper Cover")3.Remove the head lamp.4.Remove the bulb socket (A) and turn signal lamp bulb (B) from the lamp assembly.Replacement1.
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad Lower Panel")3.Remove the steering column shroud panel.(Refer to Body - "Steering Column Shroud Panel")4.Disconnect the immobilizer connector (A) and press the locking pin (B) using an awl.