Hyundai Elantra (CN7): Keyless Entry And Burglar Alarm / Specifications
| Specification |
|
Item
|
Specification
|
| Power source | 3V |
| Operating temperature | -10°C ~ +60°C |
| RF Modulation | FSK |
| LF Modulation | ASK |
| RF frequency | 433.92 MHz |
| Button number | 3 |
| Function | Door lock |
| Door unlock | |
| Tailgate unlock |
Component Location1. Hood switch2. Burglar horn3. Integrated body control unit (IBU)4. Door lock / unlock buzzer5. Front dodr lock actuator & switch6.
Inspection • Wrap the protective tape on the tool to disassemble with the screwdriver or remover. • Use caution in keeping and handling during disassembling/assembling because it is easily contaminated with lubricant and oil.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mood Lamp
Repair procedures RemovalMood lamp unit1.Disconnect the negative (-) battery terminal.2.Remove the main crash pad assembly.(Refer to Body - "Main Crash Pad Assembly")3.Loosen the mounting screws and remove the main crash pad air duct (A).4.Loosen the mounting screws and remove the mood lamp unit (A).
Hyundai Elantra (CN7) 2021-2026 Service Manual: Blower Resistor (Manual)
Repair procedures Inspection1.Measure the resistance between the terminals.2.The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)Replacement1.Disconnect the negative (-) battery terminal.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Driver assistance system
- Front Bumper
- Drive Mode
- New on site
- Most important about car
