Components and components location Components Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the driver door trim.
Components and components location Component Location1. Lumber support motor2. Reclining motor3. Front height motor4. Slide motor5. Rear height motor6.
Repair procedures Oil Specification1.The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed.2.Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the model of compressor.
Description and OperationBlcok Diagram • This system monitors the driving situations through the radar and the camera. Thus, for a situation out of the sensing range, the system may not normally operate. The System may be limited when : • The radar sensor or camer