Hyundai Elantra (CN7): Warning and Indicator Lights / Light ON Indicator Light
This indicator light illuminates:
When the tail lights or headlamps are on.
This indicator light illuminates: When the headlights are on and in the high beam position. When the turn signal lever is pulled into the Flash-to-Pass position.
This indicator light illuminates: When the High Beam is on with the light switch in the AUTO light position. If your vehicle detects oncoming or preceding vehicles, High Beam Assist system will switch the high beam to low beam automatically.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Head Lamp Leveling Device
Components and components location Component Location1. Head lamp leveling actuator2. Head lamp leveling switch Head Lamp Leveling Switch Schematic diagrams Schematic Diagrams Repair procedures Replacement1.Disconnect the negative (-) battery terminal.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mode Control Actuator
Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Driver assistance system
- General Tightening Torque Table. General information
- Front Radar Unit
- New on site
- Most important about car
