Hyundai Elantra (CN7): Warning and Indicator Lights / Engine Oil Pressure Warning Light

This warning light illuminates:

When the engine oil pressure is low.

If the engine oil pressure is low:

1. Drive carefully to the nearest safe location and stop your vehicle.

2. Turn the engine off and check the engine oil level (For more information, refer to "Engine Oil" in chapter 8). If the level is low, add oil as required.

If the warning light remains on after adding oil or if oil is not available, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.

NOTICE

  • If the engine is not turned OFF immediately after the Engine Oil Pressure Warning Light is illuminated, severe damage could occur.
  • If the warning light stays on while the engine is running, it indicates that there may be serious engine damage or malfunction. In this case:
    1. Stop the vehicle as soon as it is safe to do so.
    2. Turn off the engine and check the oil level. If the oil level is low, fill the engine oil to the proper level.
    3. Start the engine again. If the warning light stays on after the engine has started, turn the engine off immediately. In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

    When this warning light illuminates while the engine is running, the battery is not being charged. Immediately turn OFF all electrical accessories.

    This warning light illuminates: When the fuel tank is nearly empty. Add fuel as soon as possible. NOTICE Driving with the Low Fuel Level warning light on or with the fuel level below "E" can cause the engine to misfire and damage the catalytic converter.

    Other information:

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Refrigerant Line

    Components and components location Components Location1. Refrigerant Pipe Assembly Repair procedures Replacement1.If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off.

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Auto Defoging Actuator

    Description and operation DescriptionThe auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actua

    Categories

     
    Copyright В© 2026 www.helantra7.com - 0.0118