Hyundai Elantra (CN7): Warning and Indicator Lights / AUTO HOLD Indicator Light
This indicator light illuminates:
- [White] When you activate the auto hold system by pressing the AUTO HOLD button.
- [Green] When you stop the vehicle completely by depressing the brake pedal with the auto hold system activated.
- [Yellow] When there is a malfunction with the auto hold system. In this case, have the vehicle inspected by an authorized HYUNDAI dealer.
This warning light illuminates: • When you place the Engine Start/Stop button to the ON position. -- The EPB warning light illuminates for approximately 3 seconds and then turns off.
This warning light illuminates: When you place the ignition switch to the ON position. -- The Electric Power Steering Warning light illuminates for about 3 seconds and then goes off.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Ignition Switch Assembly. Repair procedures
Repair procedures Replacement1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad")3.Remove the steering column upper & Lower shroud.4.Remove the ignition switch and disconnecting the Key Warning / immobilizer connector.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Parking Distance Warning (PDW)
Description and operation Description• PDW consists of 8 sensors (front : 4 units, rear : 4 units) that are used to detect obstacles and transmit the result in three separate warning levels, the first, second and third to IBU via LIN communication.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Integrated Thermal Management Module (ITM)
- Specifications
- Maintenance
- New on site
- Most important about car
