Hyundai Elantra (CN7): Warning and Indicator Lights / Master Warning Light
This indicator light illuminates:
When there is a malfunction in operation in any of the following systems:
-- Forward Collision-Avoidance Assist
system malfunction (if equipped)
-- Forward Collision-Avoidance Assist
radar blocked (if equipped)
-- Blind-Spot Collision Warning system
malfunction (if equipped)
-- Blind-Spot Collision Warning radar
blocked (if equipped)
-- High Beam Assist malfunction
(if equipped)
-- Lamp malfunction (if equipped)
-- Smart Cruise Control malfunction
(if equipped)
-- Tire Pressure Monitoring System
(TPMS) malfunction (if equipped)
To identify the details of the warning, look at the LCD display.
This warning light illuminates: When the fuel tank is nearly empty. Add fuel as soon as possible. NOTICE Driving with the Low Fuel Level warning light on or with the fuel level below "E" can cause the engine to misfire and damage the catalytic converter.
This warning light illuminates: • When you place the ignition in the ON position. -- It illuminates for approximately 3 seconds and then goes off.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: A/C Pressure Transducer
Description and operation DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Ambient Temperature Sensor
Description and operation DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Instrument Cluster
- Engine Mechanical System
- Rear Seats
- New on site
- Most important about car
