Hyundai Elantra (CN7): General Information
- General Tightening Torque Table. General information
- Important Safety Notice. General information
- Identification Numbers. General information
- Warning and Caution Labels. General information
- Lift and Support Points. General information
- Towing. General information
- Basic Service Symbols. General information
- General Service Information. General information
This service manual for the 2021 Hyundai Elantra (CN7) is your go-to resource for everything you need to maintain, service, and repair your Elantra with precision.
General information Tightening Torque Table of Standard Parts BOLT (Nominal diameter) NUT (Nominal diameter) BOLT/NUT Normal screw Torque Nm (kg.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Condenser
Components and components location Components Location[General type]1. Condenser[N Line]1. Condenser Repair procedures Inspection1.Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Heater & A/C Control Unit (DATC)
Components and components location Components[This illustration shows the LHD type. RHD type is symmetrical.][Connector A] Pin No Function Pin No Function 1Battery9IGN22ILL+ (TAIL)10ISG Battery (+)3-11IGN14LIN BUS12HTD5-13-6-14-7-15-8RHEO (
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Front Radar Unit
- Body Electrical System
- Driver assistance system
- New on site
- Most important about car
