Hyundai Elantra (CN7): General Information / General Tightening Torque Table. General information

Hyundai Elantra (CN7) 2021-2026 Service Manual / General Information / General Tightening Torque Table. General information

General information

Tightening Torque Table of Standard Parts
BOLT (Nominal diameter)
NUT (Nominal diameter)


BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.8 (0.031)
2.0 ~ 3.0 (0.2 ~ 0.3, 1.4 ~ 2.2)
4.9 ~ 6.9 (0.5 ~ 0.7, 3.6 ~ 5.1)
7.8 ~ 10.8 (0.8 ~ 1.1, 5.8 ~ 8.0)
M6
1 (0.039)
2.9 ~ 4.9 (0.3 ~ 0.5, 2.2 ~ 3.6)  
8.8 ~ 12.7 (0.9 ~ 1.3, 6.5 ~ 9.4)  
13.7 ~ 18.6 (1.4 ~ 1.9, 10.1 ~ 13.7)
M8
1.25 (0.049)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
22.6 ~ 30.4 (2.3 ~ 3.1, 16.6 ~ 22.4)  
33.3 ~ 44.1 (3.4 ~ 4.5, 24.6 ~ 32.5)
M10
1.5 (0.059)
16.7 ~ 22.6 (1.7 ~ 2.3, 12.3 ~ 16.6)
45.1 ~ 60.8 (4.6 ~ 6.2, 33.3 ~ 44.8)
65.7 ~ 88.3 (6.7 ~ 9.0, 48.5 ~ 65.1)
M12
1.75 (0.068)
29.4 ~ 39.2 (3.0 ~ 4.0, 21.7 ~ 28.9)
78.5 ~ 105.9 (8.0 ~ 10.8, 57.9 ~ 78.1)
114.7 ~ 154.9 (11.7 ~ 15.8, 84.6 ~ 114.3)
M14
2 (0.078)
47.1 ~ 63.7 (4.8 ~ 6.5, 34.7 ~ 47.0)
125.5 ~ 169.7 (12.8 ~ 17.3, 92.6 ~ 125.1)
183.4 ~ 249.1 (18.7 ~ 25.4, 135.3 ~ 183.7)
M16
2 (0.078)
73.5 ~ 100.0 (7.5 ~ 10.2, 54.2 ~ 73.8)
197.1 ~ 266.7 (20.1 ~ 27.2, 145.4 ~ 196.7)
288.3 ~ 390.3 (29.4 ~ 39.8, 212.7 ~ 287.9)
M20
2.5 (0.098)
144.2 ~ 195.2 (14.7 ~ 19.9, 106.3 ~ 143.9)
396.2 ~ 535.4 (40.4 ~ 54.6, 292.2 ~ 394.9)
565.8 ~ 764.9 (57.7 ~ 78.0, 417.3 ~ 564.2)
M24
3 (0.118)
249.1 ~ 337.3 (25.4 ~ 34.4, 183.7 ~ 248.8)
687.4 ~ 929.7 (70.1 ~ 94.8, 507.0 ~ 685.7)
975.8 ~ 1320.0 (99.5 ~ 134.6, 719.7 ~ 973.6)
M30
3.5 (0.137)
499.2 ~ 674.7 (50.9 ~ 68.8, 368.2 ~ 497.6)
1372.9 ~ 1858.4 (140.0 ~ 189.5, 1012.6 ~ 1370.7)
1956.4 ~ 2647.8 (199.5 ~ 270.0, 1443.0 ~ 1952.9)

BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.5 (0.019)
2.0 ~ 3.0 (0.2 ~ 0.3, 1.4 ~ 2.2)
5.9 ~ 8.8 (0.6 ~ 0.9, 4.3 ~ 6.5)
8.8 ~ 12.7 (0.9 ~ 1.3, 6.5 ~ 9.4)
M6
0.75 (0.029)
3.9 ~ 4.9 (0.4 ~ 0.5, 2.9 ~ 3.6)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
14.7 ~ 20.6 (1.5 ~ 2.1, 10.8 ~ 15.2)
M8
1 (0.039)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
24.5 ~ 32.4 (2.5 ~ 3.3, 18.1 ~ 23.9)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
M10
1.25 (0.049)
17.7 ~ 23.5 (1.8 ~ 2.4, 13.0 ~ 17.4)
47.1 ~ 63.7 (4.8 ~ 6.5, 34.7 ~ 47.0)
69.6 ~ 94.1 (7.1 ~ 9.6, 51.4 ~ 69.4)
M12
1.25 (0.049)
32.4 ~ 44.1 (3.3 ~ 4.5, 23.9 ~ 32.5)
86.3 ~ 117.7 (8.8 ~ 12.0, 63.7 ~ 86.8)
127.5 ~ 172.6 (13.0 ~ 17.6, 94.0 ~ 127.3)
M14
1.5 (0.059)
51.0 ~ 69.6 (5.2 ~ 7.1, 37.6 ~ 51.4)
136.3 ~ 185.3 (13.9 ~ 18.9, 100.5 ~ 136.7)
201.0 ~ 271.6 (20.5 ~ 27.7, 148.3 ~ 200.4)
M16
1.5 (0.059)
79.4 ~ 107.9 (8.1 ~ 11.0, 58.6 ~ 79.6)
211.8 ~ 286.4 (21.6 ~ 29.2, 156.2 ~ 211.2)
311.8 ~ 421.7 (31.8 ~ 43.0, 230.0 ~ 311.0)
M20
1.5 (0.059)
163.8 ~ 221.6 (16.7 ~ 22.6, 120.8 ~ 163.5)
448.2 ~ 607.0 (45.7 ~ 61.9, 330.5 ~ 447.7)
639.4 ~ 864.9 (65.2 ~ 88.2, 471.6 ~ 638.0)
M24
2 (0.078)
276.5 ~ 373.6 (28.2 ~ 38.1, 204.0 ~ 275.6)
759.0 ~ 1026.8 (77.4 ~ 104.7, 559.8 ~ 757.3)
1080.7 ~ 1462.2 (110.2 ~ 149.1, 797.1 ~ 1078.4)
M30
2 (0.078)
562.9 ~ 762.0 (57.4 ~ 77.7, 415.2 ~ 562.0)
1553.4 ~ 2102.5 (158.4 ~ 214.4, 1145.7 ~ 1550.8)
2210.4 ~ 2991.0 (225.4 ~ 305.0, 1630.3 ~ 2206.1)

Flange BOLT (Nominal diameter)
Flange NUT (Nominal diameter)


Flange BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.8 (0.031)
2.0 ~ 2.9 (0.2 ~ 0.3, 1.4 ~ 2.2)
5.9 ~ 7.8 (0.6 ~ 0.8, 4.3 ~ 5.8)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
M6
1 (0.039)
3.9 ~ 4.9 (0.4 ~ 0.5, 2.9 ~ 3.6)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
14.7 ~ 19.6 (1.5 ~ 2.0, 10.8 ~ 14.5)
M8
1.25 (0.049)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
24.5 ~ 32.4 (2.5 ~ 3.3, 18.1 ~ 23.9)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
M10
1.5 (0.059)
17.7 ~ 24.5 (1.8 ~ 2.5, 13.0 ~ 18.1)
48.1 ~ 65.7 (4.9 ~ 6.7, 35.4 ~ 48.5)
70.6 ~ 96.1 (7.2 ~ 9.8, 52.1 ~ 70.9)
M12
1.75 (0.068)
31.4 ~ 43.1 (3.2 ~ 4.4, 23.1 ~ 31.8)
84.3 ~ 113.8 (8.6 ~ 11.6, 62.2 ~ 83.9)
123.6 ~ 167.7 (12.6 ~ 17.1, 91.1 ~ 123.7)
M14
2 (0.078)
51.0 ~ 68.6 (5.2 ~ 7.0, 37.6 ~ 50.6)
135.3 ~ 182.4 (13.8 ~ 18.6, 99.8 ~ 134.5)
198.1 ~ 268.7 (20.2 ~ 27.4, 146.1 ~ 198.2)
M16
2 (0.078)
79.4 ~ 107.9 (8.1 ~ 11.0, 58.6 ~ 79.6)
212.8 ~ 288.3 (21.7 ~ 29.4, 157.0 ~ 212.7)
311.8 ~ 421.7 (31.8 ~ 43.0, 230.0 ~ 311.0)

Flange BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.5 (0.019)
2.9 ~ 2.9 (0.3 ~ 0.3, 2.2 ~ 2.2)
6.9 ~ 8.8 (0.7 ~ 0.9, 5.1 ~ 6.5)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
M6
0.75 (0.029)
3.9 ~ 5.9 (0.4 ~ 0.6, 2.9 ~ 4.3)
10.8 ~ 14.7 (1.1 ~ 1.5, 8.0 ~ 10.8)
16.7 ~ 21.6 (1.7 ~ 2.2, 12.3 ~ 15.9)
M8
1 (0.039)
9.8 ~ 12.7 (1.0 ~ 1.3, 7.2 ~ 9.4)
26.5 ~ 35.3 (2.7 ~ 3.6, 19.5 ~ 26.0)
38.2 ~ 52.0 (3.9 ~ 5.3, 28.2 ~ 38.3)
M10
1.25 (0.049)
19.6 ~ 25.5 (2.0 ~ 2.6, 14.5 ~ 18.8)
51.0 ~ 68.6 (5.2 ~ 7.0, 37.6 ~ 50.6)
75.5 ~ 102.0 (7.7 ~ 10.4, 55.7 ~ 75.2)
M12
1.25 (0.049)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
94.1 ~ 126.5 (9.6 ~ 12.9, 69.4 ~ 93.3)
138.3 ~ 186.3 (14.1 ~ 19.0, 102.0 ~ 137.4)
M14
1.5 (0.059)
55.9 ~ 75.5 (5.7 ~ 7.7, 41.2 ~ 55.7)
148.1 ~ 200.1 (15.1 ~ 20.4, 109.2 ~ 147.6)
216.7 ~ 293.2 (22.1 ~ 29.9, 159.8 ~ 216.3)
M16
1.5 (0.059)
86.3 ~ 116.7 (8.8 ~ 11.9, 63.7 ~ 86.1)
229.5 ~ 309.9 (23.4 ~ 31.6, 169.3 ~ 228.6)
336.4 ~ 455.0 (34.3 ~ 46.4, 248.1 ~ 335.6)

   
1)
The torques shown in the table are standard values under the following conditions.
•
Nuts and bolts are made of galvanized steel bar.
•
Galvanized plain steel washers are inserted.
•
All nuts, bolts and plain washers are dry.
2)
The torques shown in the table are not applicable.
•
When spring washers, toothed washers and the like are inserted.
•
If plastic parts are fastened.
•
If self-tapping screws or self-locking nuts are used.
•
If threads and surfaces are coated with oil.

    General information Important Safety NoticeProper service methods and repair procedures are essential for safe, reliable operation of all motor vehicles as well as personal safety of the operator.

    Other information:

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Specifications

    SpecificationAir Conditioner Item Specification CompressorTypeGamma 1.6 MPI, Gasoline 2.0 NU MPI, Gasoline 1.6 T-GDI : 6HVx14Gasoline 1.6 MPI : 6HVe14Oil type & CapacityFD46XG (IDEMITSU) 100 ± 10 g Pulley type6PK-TYPEDisplacement145 cc/revExpansion valveTypeBlock type RefrigerantTypeR - 134

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Repair procedures

    Variant Coding    When you need variant coding:– Replace Front View Camera with a new one※ EOL Variant Coding and calibration required for new replacementFront View Camera Variant CodingFront view camera variant coding makes it possible to operate functions for each vehicle type.

    Categories

     
    Copyright © 2026 www.helantra7.com - 0.0168