Hyundai Elantra (CN7): Intelligent variable transmission / Good driving practices

  • Never move the shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed.
  • Never move the shift lever into P (Park) when the vehicle is in motion.
  • Be sure the vehicle is completely stopped before you attempt to shift into R (Reverse) or D (Drive).
  • Do not move the shift lever to N (Neutral) when driving. Doing so may result in an accident because of a loss of engine braking and the transmission could be damaged.
  • When driving uphill or downhill, always shift to D (Drive) for driving forward or shift to R (Reverse) for driving backwards, and check the gear position indicated on the cluster before driving. Driving in the opposite direction of the selected gear, can lead to a dangerous situation by shutting off the engine and affecting the braking performance.
  • Do not drive with your foot resting on the brake pedal. Even light, but consistent pedal pressure can result in the brakes overheating, brake wear and possibly even brake failure.
  • Do not hold the vehicle on an incline with the accelerator pedal. This can cause the transmission to overheat. Always use the brake pedal or parking brake.
  • Always apply the parking brake when leaving the vehicle. Do not depend on placing the transmission in P (Park) to keep the vehicle from moving.
  • Exercise extreme caution when driving on a slippery surface. Be especially careful when braking, accelerating or shifting gears. On a slippery surface, an abrupt change in vehicle speed can cause the drive wheels to lose traction and may cause loss of vehicle control resulting in an accident.
  • Optimum vehicle performance and economy is obtained by smoothly depressing and releasing the accelerator.

WARNING

To reduce the risk of SERIOUS INJURY or DEATH:

  • ALWAYS wear your seat belt. In a collision, an unbelted occupant is significantly more likely to be seriously injured or killed than a properly belted occupant.
  • Avoid high speeds when cornering or turning.
  • Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns.
  • The risk of rollover is greatly increased if you lose control of your vehicle at highway speeds.
  • Loss of control often occurs if two or more wheels drop off the roadway and the driver over steers to reenter the roadway.
  • In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes.
  • HYUNDAI recommends you follow all posted speed limits.

    Always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, apply the parking brake, and place the ignition switch in the LOCK/ OFF position.

    Power Brakes Your vehicle has power-assisted brakes that adjust automatically through normal usage. If the engine is not running or is turned off while driving, the power assist for the brakes will not work.

    Other information:

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Power Mosfet

    Description and operation DescriptionIt is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor. Repair procedures Inspection1.Manually operate the control switch and measure the voltage of the blower motor.

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Smart Cruise Control (SCC) Switch

    Schematic diagrams Circuit DiagramTRIP / SCC / LFA Repair procedures Inspection1.Check for resistance between terminals in each switch position (LH).[LH : Audio + Hands free] Switch Resistance (±5%) SEEK Up430 ΩSEEK Down1.

    Categories

     
    Copyright © 2025 www.helantra7.com - 0.0127