Hyundai Elantra (CN7): Smart Key / Trunk opening & Panic button

Trunk opening

To open:

1. Make sure you have the smart key in your possession and either press inside the trunk emblem or press the Trunk Unlock button (3) on the smart key for more than one second.

2. Once the trunk is opened, the hazard warning lights will blink two times.

  • The trunk handle button will only operate when the smart key is within 28~40 inches (0.7 ~1 m) from the trunk handle.
  • Once the trunk is opened and then closed, the trunk will automatically lock.

Panic button

Press and hold the Panic button (4) for more than one second. The horn sounds and hazard warning lights flash for about 30 seconds. To cancel the panic mode, press any button on the smart key.

    1. Make sure you have the smart key in your possession. 2. Press the Door Unlock button (2) on the smart key, press the button on the front door handle or touch the door unlock sensor inside of the front door handle to unlock the doors.

    You can start the engine and turn on the climate system by pressing the remote start button (5) outside the vehicle. To start and stop engine remotely : 1.

    Other information:

    Hyundai Elantra (CN7) 2021-2026 Service Manual: In-car Sensor

    Description and operation DescriptionThe In-car air temperature sensor is built in the heater & A/C control unit.The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accor

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Warning Indicator

    Components and components location Components1. BSD Indicator2. Side repeater lamp Repair procedures Inspection1.Disconnect the negative (-) battery terminal.2.Remove the front door trim.(Refer to Body - "Front door trim")3.Disconnect the power door mirror connector from the harness4.

    Categories

     
    Copyright В© 2026 www.helantra7.com - 0.02