Hyundai Elantra: Body Electrical System / Horn
Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel.(Refer to Steering System - "Steering Wheel")3.Remove the steering column upper and lower shrouds after loosening the screws...
Component Location1. Horn switch2. Horn relay (Engine room compartment)3. Horn (Low pitch)4. Horn (High pitch)5. Clock spring..
Other information:
Repair procedures
Removal1.Disconnect the battery negative terminal. 2.Remove the air duct and air cleaner assembly.(Refer to Intake and Exhaust System - "Air Cleaner")3.Remove the battery and battery tray.(Refer to Engine Electrical System - "Battery")4.Disconnect the brake vacuum hose (A). 5.Disconnect the fuel hose (A) and PCSV hose (B).6.Remove the main wiring protector (A) after disconnect..
Removal[Rear disc brake type]1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the rear wheel and tire (A) from the rear hub. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
•
Be careful not to damage the hub bolts when removing the rear wheel and tire (A).3..