Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Accessing Your Vehicle / Immobilizer System

The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled.

When the ignition switch is placed in the ON position, the immobilizer system indicator should come on briefly, then go off. If the indicator starts to blink, the system does not recognize the coding of the key.

Turn the ignition switch to the LOCK/OFF position, then turn the ignition switch to the ON position again.

In some circumstances, the vehicle may not recognize your smart key if another smart key device is nearby or a metal object such as a key chain is causing interference with the smart key.

If this occurs, your vehicle may not start. Remove any metal objects or additional keys near the smart key before attempting to start the vehicle again.

If the system repeatedly does not recognize the coding of the key, it is recommended that you contact your HYUNDAI dealer.

Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable.

WARNING

In order to prevent theft of your vehicle, do not leave spare keys anywhere in your vehicle. Your immobilizer password is a customer unique password and should be kept confidential.

NOTICE

The transponder in your key is an important part of the immobilizer system. It is designed to give years of trouble-free service, however you should avoid exposure to moisture, static electricity and rough handling. Immobilizer system malfunction could occur.

Information

This device complies with Part 15 of the FCC rules.

Operation is subject to the following three conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device

    Battery replacement

    If the Smart Key is not working properly, try replacing the battery with a new one. Battery Type: CR2032 To replace the battery: 1. Remove the mechanical key...

    Hyundai Digital Key

    Digital Key Application To use Hyundai Digital Key mobile app, you should install Hyundai digital key application. Search ‘Hyundai digital key’ in the Google Play Store and download the app...

    Other information:

    Hyundai Elantra (CN7) 2021-2024 Service Manual: Dynamic Damper


    Repair procedures Removal1.Remove the front drive shaft.(Refer to Driveshaft Assembly - "Front Driveshaft")2.Remove the trans axle side joint.(Refer to Driveshaft Assembly - "Transaxl Joint")3.Remove the dynamic damper band (A, B) using driver (-)...

    Hyundai Elantra (CN7) 2021-2024 Service Manual: Repair procedures


    AdjustmentInspect Glass Alignment1.Inspect the step height between the roof panel (A) and the glass weatherstrip (B) and then adjust it if necessary. Alignment adjustment Standard value [mm(in.)] (1) Front edge : 0 mm (0 in...

    Categories

    Manual climate control system

    To defog inside windshield

    [A] : Type A, [B] : Type B

    1. Select any fan speed except “0” position.

    2. Select the desired temperature.

    3. Select the or position.

    read more

    Copyright © 2024 www.helantra7.com