Hyundai Elantra (CN7): Advanced Driver Assistance System (ADAS) / Special service tools

Hyundai Elantra (CN7) 2021-2026 Service Manual / Advanced Driver Assistance System (ADAS) / Special service tools

Special Service Tools
Tool Name / Number
Illustration
Description
LKA Compensator
(09890-3V100)

Used for compensating front view camera unit
BCW Sensor Correction Tool Set
(09958-3T500)

Used to correct the blind-spot radar unit.
Case, Manual, String
(09958-3T120)

Used to correct the blind-spot radar unit.
Used to create a center line.
Vertical Plumb
(09958-3T010)

Used to correct the blind-spot radar unit.
Used to create a center line.
Spirit Level
(09958-3T070)

Used to correct the blind-spot radar unit.
Used to measure the horizontal angle.
BCW Unit Fixing Adaptor
(09958-3T080)

Used to correct the blind-spot radar unit.
Used to measure the horizontal angle.
Digital Protractor
(09958-3T090)

Used to correct the blind-spot radar unit.
Used to measure the horizontal angle.
Digital Inclinometer
(09958-3T100)

Used to correct the blind-spot radar unit.
Used to measure the vertical angle.
SCC Setting Reflector
(09964-C1100)

Used for front radar unit setting
SCC Setting Beam
(09964-C1200)

Used for front radar unit setting.
Used for front view camera unit setting.
Calibration Reflector
(0K964-J5100)

Used for front radar unit setting
SCC Setting Tripod
(09964-C1300)

Used for front radar unit setting

    DescriptionAdvanced Driver Assistance System (ADAS) analyzes the exterior environment of a vehicle and driver status to provide visibility / display / guide / warning for driving and parking.

    Other information:

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Blower Motor

    Repair procedures Inspection1.Connect the battery voltage and check the blower motor rotation.Replacement1.Disconnect the negative (-) battery terminal.2.Disconnect the blower motor connector (A) and then remove the blower motor (B) after loosening the screws.

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Front View Camera Unit

    Schematic diagrams Circuit Diagram Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the cover (A) & (B).3.Disconnect the front view camera unit connector (A).4.Separate the fixed points (A) of coupler.5.

    Categories

     
    Copyright В© 2026 www.helantra7.com - 0.0128