Hyundai Elantra: Warning and Indicator Lights / AUTO HOLD Indicator Light

This indicator light illuminates:
- [White] When you activate the auto
hold system by pressing the AUTO
HOLD button.
- [Green] When you stop the vehicle
completely by depressing the brake
pedal with the auto hold system
activated.
- [Yellow] When there is a malfunction
with the auto hold system.
In this case, have the vehicle
inspected by an authorized HYUNDAI
dealer.
This warning light illuminates:
• When you place the Engine Start/Stop
button to the ON position.
-- The EPB warning light illuminates
for approximately 3 seconds and
then turns off...
This warning light illuminates:
When you place the ignition switch to
the ON position.
-- The Electric Power Steering Warning
light illuminates for about 3 seconds
and then goes off...
Other information:
To set speed limit
1. Press and hold Driving Assist
() button at the desired
speed. The Manual Speed Limit
Assist enabled () indicator will
illuminate on the cluster.
2. Push the + switch up or - switch down,
and release it at the desired speed...
1. Close all doors, engine hood and
trunk.
2. Carry the smart key.
3. Either touch the touch sensor on the
door handle (the engraved part) or
press the Door Lock button (1) on the
smart key.
4. The hazard warning lights will blink.
5. Make sure the doors are locked by
pulling the door outside handle...