| Components |

| 1.Front door trim 2. Front door quadrant inner cover 3. Front door belt inside weatherstrip 4. Front door module 5. Front door belt outside weatherstrip | 6. Front door window glass run 7. Front door frame molding 8. Front door body side weatherstrip 9. Front door side weatherstrip 10. Front door frame garnish 11. Front door hinge |
AdjustmentGlass Adjustment • Check the glass run channel for damage or deterioration, and replace it if necessary.
Repair procedures RemovalMood lamp unit1.Disconnect the negative (-) battery terminal.2.Remove the main crash pad assembly.(Refer to Body - "Main Crash Pad Assembly")3.Loosen the mounting screws and remove the main crash pad air duct (A).4.Loosen the mounting screws and remove the mood lamp unit (A).
Description and operation DescriptionIt is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor. Repair procedures Inspection1.Manually operate the control switch and measure the voltage of the blower motor.