Hyundai Elantra (CN7): Emission Control System / Description and operation

Hyundai Elantra (CN7) 2021-2026 Service Manual / Emission Control System / Description and operation

Description
Emissions Control System consists of three major systems.
•
Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
•
Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
•
Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.

    Components Location1. Canister2. Purge control solenoid valve (PCSV)3. Fuel Tank Air Filter4. Catalytic converter (WCC)5. Catalytic converter (UCC)1. Canister 2.

    Other information:

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Compressor

    Description and operation DescriptionThe compressor is the power unit of the A/C system.It is located on the side of engine block and driven by a V-belt of the engine.The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Temperature Control Actuator

    Description and operation DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.

    Categories

     
    Copyright © 2026 www.helantra7.com - 0.0199