Hyundai Elantra (CN7): Emission Control System
- Description and operation
- Components and components location
- Troubleshooting
- Specifications
- Schematic diagrams
- Evaporative Emission Control System
- Exhaust Emission Control System
Repair procedures Inspection1.Turn ignition switch OFF and disconnect the negative (-) battery cable.2.Remove the fuse box cover.3.Remove the starter relay (A).
DescriptionEmissions Control System consists of three major systems.• Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: High Mounted Stop Lamp
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear package tray trim.(Refer to Body - "Rear Package Tray Trim")3.Loosen the mounting screws and remove the high mounted stop lamp (A).Installation1.Install the high mounted stop lamp.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Ambient Temperature Sensor
Description and operation DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Body (Interior and Exterior)
- Vehicle Information
- Drive Mode
- New on site
- Most important about car
