Hyundai Elantra (CN7): Emission Control System / Troubleshooting
| Troubleshooting |
|
Symptom
|
Suspect Area
|
| Engine will not start or stuggle to start | Vapor hose damaged or disconnected |
| Engine stuggle to start | Malfunction of the Purge Control Solenoid Valve |
| Rough idle or engine stalls | Vapor hose damaged or disconnected |
| Malfunction of the PCV valve | |
| Rough idle | Malfunction of the Evaporative Emission Control System |
| Excessive oil consumption | Positive crankcase ventilation line clogged |
Components Location1. Canister2. Purge control solenoid valve (PCSV)3. Fuel Tank Air Filter4. Catalytic converter (WCC)5. Catalytic converter (UCC)1. Canister 2.
SpecificationsPurge Control Solenoid Valve (PCSV)▷ Specification Item Specification Coil Resistance (Ω)22.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Description and operation
DescriptionSystem OverviewThe System offers the following features:– Human / machine interface through a 1-stage button, for terminal switching and engine start.– Control of external relays for ACC / IGN1 / IGN2 terminal switching and STARTER, without use of mechanical ignition switch.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Auto Defogging Sensor
Description DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuat
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Rear Seats
- Recommended Cold Tire Inflation Pressures
- Body Electrical System
- New on site
- Most important about car
