Hyundai Elantra (CN7): Steering System / Specifications

Hyundai Elantra (CN7) 2021-2025 Service Manual / Steering System / Specifications

Specifications
Item
Specification
Type
Electric Power Steering System
Steering gear
Type
Rack & Pinion
Rack stroke
154 mm (6.0630 in.) ± 1 (0.3937 in)
Steering angle (Max.)
Inner
39.7° + 0.5 / -1.5
Outer
32.7°

Tightening Torques
Item
Tightening torque (kgf.m)
N.m
Kgf.m
lb-ft
Tire wheel hub nut
107.9 - 127.5
11.0 - 13.0
79.6 - 94.0
Universal joint to steering column assembly
49.0 - 58.8
5.0 - 6.0
36.2 - 43.4
Steering column mounting nuts
25.0 - 29.4
2.5 - 3.0
14.5 - 21.7
Steering column mounting bolt
53.9 - 58.8
5.5 - 6.0
39.8 - 43.4
Front axle to tie rod end
34.3 - 44.1
3.5 - 4.5
25.3 - 32.5
Tie rod end mounting nut
49.0 - 53.9
5.0 - 5.5
36.2 - 39.8
Front axle to lower arm
68.6 - 80.4
7.0 - 8.2
50.6 - 59.3
Sub flame to steering gear box
107.9 - 127.5
11.0 - 13.0
79.6 - 94.0
Universal joint to steering gear box
49.0 - 58.8
5.0 - 6.0
36.2 - 43.4
Steering wheel mounting bolt
44.1 - 53.9
4.5 - 5.5
32.5 - 39.8
MDPS motor mounting bolt
8.0 - 12.0
0.82 - 1.22
5.9 - 8.8
Heat protector mounting bolt
6.9 - 10.8
0.7 - 1.1
5.1 - 8.0

    Troubleshooting Symptom Probable cause Remedy play in steeringLoose yoke plugRetightenLoose steering gear mounting boltsRetightenLoose or worn tie rod endRetighten or replace as necessarySteering wheel does not return properlyExcessive turning resistance of tie rod endReplaceYoke plug excessively tightAdjustTie rod and/or ball joint cannot turn smoothlyReplaceLoose mounting of gear box mounting bracket Worn steering shaft joint and/orRetightenWorn steering shaft joint and/or body grommetCorrect or replaceDistorted rackReplaceDamaged pinion bearingReplaceRattling or chucking noise in the rack and pinionInterference with hoses from vehicle bodyRepositionLoose gear box bracketRetightenLoose tie rod end and/or ball jointRetightenWorn tie rod and/or ball jointRetighten

    Special Service Tools Tool (Number and Name) IIIustration Use 09568-1S100Ball joint removerSaperate the ball joint from the front alxe09563-IB000Small bearing removerRemove the small bearing09563-IB200Small bearing installerInstall the small bearing

    Other information:

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Heater Control Unit

    Components and components location Component Location1. Heater control unitComponents[Connector A] Pin No Function Pin No Function 1Mode control actuator (Feedback)21Mode control actuator (Vent)2Intake actuator (Feedback)22Mode control actu

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Description and operation

    Description and OperationBlcok Diagram    • This system monitors the driving situations through the radar and the camera. Thus, for a situation out of the sensing range, the system may not normally operate. The System may be limited when : • The radar sensor or camer

    Categories

     
    Copyright © 2025 www.helantra7.com - 0.0161