
Information
1. Door lock 2. Door unlock 3. Trunk open 4. Panic 5. Remote Start If you press any button of the smart key during the Detect and Alert stage, the Smart Trunk release function will be deactivated.
Opening the fuel filler door The fuel filler door must be opened from inside the vehicle by pulling up the fuel filler door opener. 1. Turn the engine off.
Components and components location Component Location1. Blower unit assemblyComponents1. Blower unit assebmly2. Blower upper cover [LH]3. Duct seal4. Blower upper cover [RH]5. Intake actuator6. Air filter cover7. Intake door8. Air filter9. Blower upper case10.
Repair procedures Inspection1.Measure the resistance between the terminals.2.The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)Replacement1.Disconnect the negative (-) battery terminal.