Hyundai Elantra: Warning and Indicator Lights / Lane Keep Assist Indicator
Light

This indicator light illuminates:
- [Green] When you activate the lane
departure warning system by pressing
the Lane Safety button and all of
the system operating conditions are
satisfied.
- [White] When function operating
conditions are not satisfied or when
the sensor does not detect the lane
line.
- [Yellow] When there is a malfunction
with Lane Keeping Assist system.
In this case, have your vehicle inspected
by an authorized HYUNDAI dealer.
This warning light illuminates:
• When you set the ignition switch or
Engine Start/Stop button to the ON
position.
-- It illuminates for approximately 3
seconds and then goes off...
This indicator light illuminates:
• When the cruise control system is
enabled...
Other information:
Repair procedures
Replacement
•
Be careful not to scratch the hood panel. 1.Using a clip remover, remove the clips and then the hood insulator pad (A).2.To install, reverse the removal procedure.
•
Replace any damaged clips (or pin - type retainers)...
Schematic diagrams
Circuit Diagram
Repair procedures
Removal1.Remove the bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")2.Disconnect the ultrasonic sensor connector (A) and remove the ultrasonic sensor (B).Installation1.Install the ultrasonic sensor.2.Install the bumper cover...