Hyundai Elantra: Lighting System / Specifications
Item
|
Type
|
Bulb Watt (W)
|
Front
| Head lamp
| Halogen
| Low beam / High beam
| 9005L+
| 60
|
DRL/Position lamp
| LED
| LED
|
LED
| Low beam
| LED
| LED
|
High beam
| LED
| LED
|
DRL/Position lamp
| LED
| LED
|
Turn signal lamp
| PY21W
| 21
|
Door mirror turn signal lamp
| LED
| LED
|
Rear
| Rear combination
| Halogen
| Tail lamp
| W5W
| 5
|
Tail / Stop lamp
| P21/5W
| 21 / 5
|
Back up lamp
| W 16W
| 16
|
Turn signal lamp
| PY 21W
| 21
|
LED
| Tail / Stop lamp
| LED
| LED
|
Back up lamp
| W 16W
| 16
|
Turn signal lamp
| PY21W
| 21
|
Back up lamp
| PY21W
| 21
|
LED
| LED
|
License plate lamp
| W5W
| 5
|
Interior
| Map lamp
| Sunroof not applied
| W10W
| 10
|
Sunroof applied
| W10
| 10
|
Room lamp
| FESTOON
| 8
|
Luggage lamp
| FESTOON
| 5
|
Vanity lamp
| FESTOON
| 5
|
Component Location1. High/Low beam2. Low beam3. High beam4. Position lamp&DRL5. Front turn signal lamp6. Map lamp7. Vanity lamp1. Stop lamp2. Turn signal lamp3...
Repair procedures
Head Lamp Aiming Instructions[Mechanical Aiming]The head lamps should be aimed with the proper beam-setting equipment, and in accordance with the equipment manufacturer's instructions...
Other information:
1. Start the engine.
2. Set the mode to the desired position.
To improve the effectiveness of
heating and cooling, select the mode
according to the following:
-- Heating:
-- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to fresh
mode or recirculation mode position...
Function warning and control
Vehicle detection
To warn the driver a vehicle is
detected, the warning light on the
outside rearview mirror will illuminate.
The system will operate when your
vehicle speed is above 12 mph (20
km/h) and the speed of the vehicle in
the blind spot area is above 7 mph (10
km/h)...