Hyundai Elantra: Keyless Entry And Burglar Alarm / Specifications
| Specification |
|
Item
|
Specification
|
| Power source | 3V |
| Operating temperature | -10°C ~ +60°C |
| RF Modulation | FSK |
| LF Modulation | ASK |
| RF frequency | 433.92 MHz |
| Button number | 3 |
| Function | Door lock |
| Door unlock | |
| Tailgate unlock |
Components and components location
Component Location1. Hood switch2. Burglar horn3. Integrated body control unit (IBU)4. Door lock / unlock buzzer5. Front dodr lock actuator & switch6...
Repair procedures
Inspection
•
Wrap the protective tape on the tool to disassemble with the screwdriver or remover. •
Use caution in keeping and handling during disassembling/assembling because it is easily contaminated with lubricant and oil...
Other information:
Hyundai Elantra (CN7) 2021-2024 Owner's Manual: Function settings
Setting Blind-Spot Safety With the engine on, select or deselect ‘Driver Assistance → Blind-Spot Safety’ from the Settings menu to set whether or not to use each function. -- If ‘Active Assist’ is selected, the system will warn the driver with a warning message, an audible warning and braking assist will be applied depending on the collision risk levels...
Hyundai Elantra (CN7) 2021-2024 Service Manual: AVN Remote Controller
Components and components location Components1. Left Remote Control Switch (Audio + Bluetooth)2. Right Remote Control Switch (Cruise + Trip) Schematic diagrams Circuit Diagram[Without paddle shift][With paddle shift][Audio + B/Tooth][Audio + B/Tooth + Voice][Trip][Trip / Cruise][Trip + Cruise + LFA)[Trip + Cruise + LFA + MSLA)[Trip + Smart Cruise + LFA)[Trip + Smart Cruise + LFA + MSLA..
Categories
- Manuals Home
- 7th Gen Hyundai Elantra Owners Manual
- 7nd Gen Hyundai Elantra Service Manual
- Instrument Cluster Control
- Maintenance Services
- Vehicle Information
- Instrument Panel Overview
- Rear Seats
Tire Rotation
To equalize tread wear, HYUNDAI recommends that the tires be rotated according to the maintenance schedule or sooner if irregular wear develops.
During rotation, check the tires for correct balance.
When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire pressure, improper wheel alignment, out-ofbalance wheels, severe braking or severe cornering. Look for bumps or bulges in the tread or side of the tire. Replace the tire if you find any of these conditions. Replace the tire if fabric or cord is visible. After rotation, be sure to bring the front and rear tire pressures to specification and check lug nut tightness (proper torque is 79~94 lbf·ft [11~13 kgf·m]).
Copyright © 2024 www.helantra7.com