Hyundai Elantra (CN7): Warning and Indicator Lights / Electronic Parking Brake (EPB) Warning Light
This warning light illuminates:
• When you place the Engine Start/Stop button to the ON position.
-- The EPB warning light illuminates for approximately 3 seconds and then turns off.
• Whenever there is a malfunction with the EPB.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
Information
The Electronic Parking Brake (EPB) Warning Light may illuminate when the Electronic Stability control (ESC) Indicator Light comes on to indicates that the ESC is not working properly (This does not indicate malfunction of the EPB).
These two warning lights illuminate at the same time while driving: When the ABS and regular brake system may not work normally. In this case, have the vehicle inspected by an authorized HYUNDAI dealer.
This indicator light illuminates: [White] When you activate the auto hold system by pressing the AUTO HOLD button. [Green] When you stop the vehicle completely by depressing the brake pedal with the auto hold system activated.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Start/Stop Button
Components and components location Component Repair procedures Removal1.Disconnect the negative(-) battery terminal.2.Remove the AVN Head unit.(Refer to Body Electrical System - "AVN(Audio Video Navigation) head unit")3.Loosen the mounting screws and remove the start/stop button (A).
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mode Control Actuator
Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Brake System
- Auto Hold. Warning messages
- Suspension System
- New on site
- Most important about car
