Hyundai Elantra: Gauges and Meters / Engine coolant temperature gauge

Type A

Type B
This gauge indicates the temperature
of the engine coolant when the ignition
switch is in the ON position.
NOTICE
If the gauge pointer moves beyond
the normal range area toward the "H"
position, it indicates overheating that
may damage the engine.
Do not continue driving with an
overheated engine. If your engine
overheats, refer to "If the Engine
Overheats" in chapter 7.
WARNING
Never remove the radiator cap or
reservoir cap when the engine is hot.
The engine coolant is under pressure
and could severely burn. Wait until the
engine is cool before adding coolant to
the reservoir.
The tachometer indicates the
approximate number of engine
revolutions per minute (RPM).
Use the tachometer to select the correct
shift points and to prevent lugging and/
or over-revving the engine...
Type A
Type B
This gauge indicates the approximate
amount of fuel remaining in the fuel tank.
Information
The fuel tank capacity is given in
chapter 2...
Other information:
Description and operation
DescriptionThe In-car air temperature sensor is built in the heater & A/C control unit.The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the control unit regulates in-..
Blind-Spot Collision Warning is designed
to help detect and monitor approaching
vehicles in the driver’s blind spot area
and warn the driver of a possible collision
with a warning message and audible
warning.
Blind-Spot Collision Warning helps
detect and inform the driver that a
vehicle is in the blind spot.
CAUTION
The detecting range may vary
depending on the speed of your vehicle.
H..