Hyundai Elantra (CN7): Rear View Monitor (RVM) / Function malfunction and limitations

Function malfunction

When Rear View Monitor is not working properly, or the screen flickers, or the camera image does not display normally, we recommend that the system be inspected by an authorized HYUNDAI dealer.

Limitations of the function

When the vehicle is stopped for a long time in winter or when the vehicle is parked in an indoor parking lot, the exhaust fumes may temporarily blur the image.

WARNING

  • The rear view camera does not cover the complete area behind the vehicle. The driver should always check the rear area directly through the inside and outside rearview mirror before parking or backing up.
  • The image shown on the screen may differ from the actual distance of the object. Make sure to directly check the vehicle's surroundings for safety.
  • Always keep the rear view camera lens clean. If the lens is covered with foreign material, it may adversely affect camera performance and Rear View Monitor may not operate normally.

    Rear view Operating conditions Shift the gear to R (Reverse), the image will appear on the screen. Press the Parking/View button (1) while the gear is in P (Park), the image will appear on the screen.

    Rear Cross-Traffic Collision Warning Assist is designed to help detect vehicles approaching from the left and right side while your vehicle is reversing, and warn the driver that a collision is imminent with a warning message and an audible warning.

    Other information:

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Evaporator Core

    Repair procedures Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the heater core cover (A) after loosening the mounting screws.4.Pull out the evaporator core (A) from the heater unit.

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Power Mosfet

    Description and operation DescriptionIt is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor. Repair procedures Inspection1.Manually operate the control switch and measure the voltage of the blower motor.

    Categories

     
    Copyright В© 2025 www.helantra7.com - 0.0145