Hyundai Elantra: Intelligent Speed Limit Assist (ISLA) / Function operation
Function warning and control
Intelligent Speed Limit Assist will warn and control the vehicle by ‘Displaying speed limit’, ‘Warning overspeed’ and ‘Changing set speed’.
Information
Function warning and control are described based on the Offset set to '0'. For details on Offset setting, refer to the “System Settings”.
Displaying speed limit
.png)
Speed limit information is displayed on the instrument cluster.
Information
- Intelligent Speed Limit Assist provides additional road sign information in addition to speed limit. The additional road sign information provided may vary according to your country.
- Supplementary sign displayed under the speed limit or overtaking restriction sign means the conditions under which the signs must be followed. If supplementary sign is not recognized, it will be displayed as blank.
Warning overspeed
.png)
When driving at a speed higher than the displayed speed limit, the red speed limit indicator will blink.
Changing set speed
.png)
If the speed limit of the road changes during the operation of Manual Speed Limit Assist or Smart Cruise Control, an arrow in the direction of up or down is displayed to inform the driver that the set speed needs to be changed. At this time, the driver can change the set speed according to the speed limit by using the + or – switch on the steering wheel.
WARNING
- If the Offset is set over ‘0’, the set speed will change to a higher speed than the speed limit of the road. If you want to drive below the speed limit, set the Offset under '0' or use the – switch on the steering wheel to lower the set speed.
- Even after changing the set speed according to the speed limit of the road, the vehicle can still be driven over the speed limit. If necessary, depress the brake pedal to reduce your driving speed.
- If the speed limit of the road is under 20 mph (30 km/h), the set speed change function will not work.
- Intelligent Speed Limit Assist operates using the speed unit in the instrument cluster set by the driver. If the speed unit is set to a unit other than the speed unit used in your country, Intelligent Speed Limit Assist may not operate properly.
Information
For more details on function operation of Smart Cruise Control, refer to “Smart Cruise Control (SCC)” section in chapter 7.
Function settings
Setting
Speed Limit
With the engine on, select or deselect
‘Driver Assistance → Speed Limit’ from
the Settings menu to set whether or not
to use each function...
Function malfunction and
limitations
Function malfunction
When Intelligent Speed Limit Assist is not
working properly, the ‘Check speed limit
system’ warning message will appear on
the cluster...
Other information:
Hyundai Elantra (CN7) 2021-2025 Owner's Manual: Sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control switch located on the overhead console. The sunroof can only be opened, closed, or tilted when the ignition switch is in the ON position. The sunroof can be operated for approximately 3 minutes after the ignition switch is turned to the ACC or OFF position...
Hyundai Elantra (CN7) 2021-2025 Owner's Manual: Seat belt use and children
Infant and small children All 50 states have child restraint laws which require children to travel in approved child restraint devices, including booster seats. The age at which seat belts can be used instead of child restraints differs among states, so you should be aware of the specific requirements in your state, and where you are travelling...
Categories
- Manuals Home
- 7th Gen Hyundai Elantra Owners Manual
- 7nd Gen Hyundai Elantra Service Manual
- Maintenance
- Engine Compartment
- Interior Overview
- Engine Oil
- Function settings
Manual climate control system
To defog inside windshield
.png)
[A] : Type A, [B] : Type B
1. Select any fan speed except “0” position.
2. Select the desired temperature.
3. Select the .png)
or
.png)
position.
