Hyundai Elantra: Basic Service Symbols / General information
There are five primary symbols used to complement illustrations. These symbols indicated the materials to be applied to parts during service.
Symbol
|
Meaning
|
| Do not reuse the part. Replace a new one.
|
| Apply engine oil or transmission oil to the part.
|
| Apply automatic transmission fluid (ATF) to the part.
|
| Apply grease to the part.
|
| Apply sealant to the part.
|
Other information:
Repair procedures
Removal1.Remove the front drive shaft.(Refer to Driveshaft Assembly - "Front Driveshaft")2.Remove the trans axle side joint.(Refer to Driveshaft Assembly - "Transaxl Joint")3.Remove the dynamic damper band (A, B) using driver (-).
•
When removing the dynamic damper, lubricate the shaft with soapy water to prevent shaft damage.4.Remove..
Components and components location
Components Location1. Front seat belt buckle
Repair procedures
Replacement1.Remove the front seat assembly.(Refer to Front Seat - "Front Seat Assembly")2.Disconnect the front seat belt buckle connector wiring (A).3.After loosening the mounting bolt, remove the front seat belt buckle (A). Tightening torque : 39.2 - 53.9 N.m (..