Hyundai Elantra: Cruise Indicator Light / Icy Road Warning Light
This indicator light illuminates:
This warning light is to warn the driver the road may be icy.
When the temperature on the outside temperature gauge is approximately below 40°F (4°C), the Icy Road Warning Light and Outside Temperature Gauge blinks and then illuminates. Also, the warning chime sounds 1 time.
The Icy Road Warning function can be activated or deactivated from the User Settings mode in the cluster LCD display.
Information
If the icy road warning light appears while driving, you should drive more attentively and safely, refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc.
LCD Display Messages
Shift to P or N to start engine
(for smart key system)
This warning message is displayed if
you try to start the engine with the shift
button not in the P (Park) or N (Neutral)
position...
Other information:
Hyundai Elantra (CN7) 2021-2025 Owner's Manual: Securing a child restraint with lap/ shoulder belt
When not using the LATCH system, all child restraints must be secured to a vehicle rear seat with the lap part of a lap/shoulder belt. WARNING ALWAYS place a rear-facing child restraint in the rear seat of the vehicle. Placing a rear-facing child restraint in the front seat can result in serious injury or death if the child restraint is struck by an inflating air bag...
Hyundai Elantra (CN7) 2021-2025 Service Manual: Memory power seat unit
Components and components location ComponentsConnector Pin Information Pin no Connector A Connector B Connector C 1-B (+)Slide switch signal (Forward)2Reclining motor (Forward)GND(Power)Reclining switch signal (Forward)3Height motor (Up)B (+)Front tilt switch signal (Up)4Slide motor (Forwa..
Categories
- Manuals Home
- 7th Gen Hyundai Elantra Owners Manual
- 7nd Gen Hyundai Elantra Service Manual
- Function settings
- Interior Overview
- Control Cable
- Drive Mode
- Maintenance
Odometer
The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
