Hyundai Elantra: Driving Safety / Manual Speed Limit Assist (MSLA)
.png)
(1) Manual Speed Limit Assist enabled
indicator
(2) Set speed
You can set the speed limit when you do
not want to drive over a specific speed.
If you drive over the preset speed limit,
Manual Speed Limit Assist will operate
(set speed limit will blink and chime will
sound) until the vehicle speed returns
within the speed limit.
Function malfunction
When Safe Exit Warning is not working
properly, the ‘Check Blind-Spot Safety
system’ warning message will appear
on the cluster, and the system will turn
off automatically or the system will be
limited...
To set speed limit
1. Press and hold Driving Assist
() button at the desired
speed. The Manual Speed Limit
Assist enabled () indicator will
illuminate on the cluster...
Other information:
Components1. Rear corner radar unit2. Speaker3. Warning indicator..
Components and components location
Components1. Shift lever knob & boots2. Shift lever assembly3. Select cable4. Shift cable5. Retainer
Repair procedures
Removal1.Turn OFF ignition switch and disconnect the negative (-) battery cable.2.Remove the floor console assembly.(Refer to Body - "Floor Console")3.Remove the snap pin (A) and then separate the select cable socket (B).4.Separat..