Hyundai Elantra: Cruise Control System (CC) / Schematic diagrams
| Schematic Diagrams |
Repair procedures
Inspection1.Check for resistance between terminals in each switch position (LH).[LH : Audio + Hands free] Switch Resistance (±5%) SEEK Up430 ΩSEEK Down1...
Other information:
Hyundai Elantra (CN7) 2021-2025 Service Manual: Repair procedures
Replacement1.Remove the plug hole (A).2.Loosen the mounting nuts and remove the wiper arm (A). Tightening torque : 22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)3.Disconnect the washer nozzle (A).4.Detach the clips, then remove the cowl top cover (B)...
Hyundai Elantra (CN7) 2021-2025 Service Manual: Rear Glass Defogger Switch
Repair procedures Diagnosis with Diagnostic toolDiagnosis with Diagnostic tool1.In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool).The diagnostic system (Diagnostic tool) provides the following information...
Categories
- Manuals Home
- 7th Gen Hyundai Elantra Owners Manual
- 7nd Gen Hyundai Elantra Service Manual
- System disabled
- Dimensions, Engine specification, Bulb Wattage
- Engine Mechanical System
- Engine Compartment
- Vehicle Information
Function malfunction and limitations
Function malfunction
.png)
When High Beam Assist is not working properly, the ‘Check High Beam Assist (HBA) system’ or ‘Check HBA (High Beam Assist) system’ warning message will appear and warning light will illuminate on the cluster. Take your vehicle to an authorized HYUNDAI dealer and have the function checked.
Copyright © 2025 www.helantra7.com