Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Suspension System / Special service tools

Special Service Tools
Tool (Number and Name)
IIIustration
Use
09546-3X100
Shock absorber lock nut removal tool

Used for remove the shock absorber lock nut
09568-1S100
Ball joint remover

Saperate the ball joint from the front alxe
09551-AL100
Rear torsion beam axle bush removal / installation tool

Rear torsion beam axle bush removal and installation tool

    Specifications

    S..

    Front Suspension System

    ..

    Other information:

    Hyundai Elantra (CN7) 2021-2023 Service Manual: Knock Sensor (KS)


    Description and operation DescriptionKnocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the cylinder block is applied as pressure to the piezoelectric element. At this time, this sensor transfers the voltage signal higher t..

    Hyundai Elantra (CN7) 2021-2023 Service Manual: Shift Cable


    Components and components location Components1. Shift lever knob & boots assembly2. Shift lever assembly3. Shift cable4. Manual control lever5. Shift cable retainer Repair procedures Removal1.Remove the air cleaner assembly and air duct.(Refer to Engine Mechnical System - "Air cleaner")2. Remove the battery and tray.(Refer to Engine Electrical System - "Battery")3.Remove the shift ..

    Categories

    Function malfunction and limitations

    Function malfunction

    When High Beam Assist is not working properly, the ‘Check High Beam Assist (HBA) system’ or ‘Check HBA (High Beam Assist) system’ warning message will appear and warning light will illuminate on the cluster. Take your vehicle to an authorized HYUNDAI dealer and have the function checked.

    read more

    Copyright © 2023 www.helantra7.com