Hyundai Elantra (CN7): Body Electrical System / Special service tools
| Special Service Tools |
|
Tool (Number and Name)
|
Illustration
|
Application
|
| RKE Battery Checker (09954-2P100) |
| Measuring the RKE battery voltage. |
General Troubleshooting InformationBefore Troubleshooting1.Check applicable fuses in the appropriate fuse/relay box.2.Check the battery for damage, state of charge, and clean and tight connections.
Components and components location Component1. Steering column2. Multifunction switch3. Clock spring4. Steering wheel5. Driver airbag module (DAB) Specifications Specifications Items Specifications Rated voltageDC 12VOperating temperature range-40 to +176°F (-40°C to +80°C)Quantity of standard loadWasherRelated current : 7ABlucking current : 15AInrush current : 20A Repair procedures Removal1.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Ignition Switch Assembly. Repair procedures
Repair procedures Replacement1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad")3.Remove the steering column upper & Lower shroud.4.Remove the ignition switch and disconnecting the Key Warning / immobilizer connector.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mode Control Actuator
Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Engine Control / Fuel System
- Drive Mode
- Maintenance
- New on site
- Most important about car
