Hyundai Elantra (CN7): Suspension System / Tires/Wheels
Components and components location Components1. Torsion beam axle2. Rear torsion beam chassis bracket Repair procedures Removal[Rear disc brake parking cable type]1.
Repair procedures Tire Wear1.Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.0630 in.)2.If the remaining tread depth (A) is less than the limit, replace the tire.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Ignition Switch Assembly. Repair procedures
Repair procedures Replacement1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad")3.Remove the steering column upper & Lower shroud.4.Remove the ignition switch and disconnecting the Key Warning / immobilizer connector.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Receiver-Drier
Repair procedures Replacement1.Remove the condenser.2.Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb-ft) 3.Remove the receiver-drier (A) from condenser using a long nose plier.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Instrument Cluster
- Specifications
- Maintenance
- New on site
- Most important about car
