
When this warning light illuminates while the engine is running, the battery is not being charged. Immediately turn OFF all electrical accessories. Try not to use electrically operated controls, such as the power windows. Keep the engine running.
Have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
This warning light illuminates: When you place the ignition switch to the ON position. -- The malfunction indicator light illuminates for about 3 seconds and then goes off.
This warning light illuminates: When the engine oil pressure is low. If the engine oil pressure is low: 1. Drive carefully to the nearest safe location and stop your vehicle.
Repair procedures Replacement1.Remove the condenser.2.Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb-ft) 3.Remove the receiver-drier (A) from condenser using a long nose plier.
Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.