Hyundai Elantra (CN7): Cooling System / Components and components location
| Components |
| 1. Water pipe 2. Water hose 3. Integrated thermal management module (ITM) 4. Heater pipe 5. Turbo charger coolant hose 6. Heater hose 7. Heater pipe A | 8. Heater pipe A gasket 9. Oil cooler hose A 10. Oil cooler pipe 11. Oil cooler hose B 12. Water inlet fitting 13. Water inlet fitting O-ring |
Engine Overheat Troubleshooting Inspection Remedy Visual inspectionInspect for shortage of coolant in reservoir tank .
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: High Mounted Stop Lamp
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear package tray trim.(Refer to Body - "Rear Package Tray Trim")3.Loosen the mounting screws and remove the high mounted stop lamp (A).Installation1.Install the high mounted stop lamp.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Compressor
Description and operation DescriptionThe compressor is the power unit of the A/C system.It is located on the side of engine block and driven by a V-belt of the engine.The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Integrated Thermal Management Module (ITM)
- Front Bumper
- Body Electrical System
- New on site
- Most important about car
