| Components |

| 1. Rear seat back assembly [LH] 2. Rear seat back assembly [RH] | 3. Rear seat back armrest 4. Rear seat cushion assembly |

| 1. Rear seat back assembly [LH] 2. Rear seat back assembly [RH] | 3. Rear seat back armrest 4. Rear seat cushion assembly |
Components and components location Component Location [General type]1. Rear seat cushion assembly2. Rear seat back assembly[N Line]1. Rear seat cushion assembly2.
Repair procedures Oil Specification1.The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed.2.Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the model of compressor.
Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.